Our top selling Noncontact Microwave Moisture Sensor Type 9900 with Accu-Lock+

Noncontact Microwave Moisture Sensor Type 9900 with Accu-Lock+

Moisture Sensor Type 9900

Strandberg is pleased to announce an important upgrade of the Noncontact Moisture Sensor Type 9900. The 9900 sensor utilizes latest microwave reflectance technology to measure moisture in web and bulk materials from very dry to saturation. The 9900 has been successfully applied in many demanding moisture measurement applications. High-speed Accu-Lock+ technology is now included in the 9900 sensor which significantly broadens the range of 9900 applications. Features include...

• Noncontact measurement of moisture, wet pickup, size add-on linear from zero percent to saturation.
• Water-tight, durable enclosure designed to withstand the harshest of industrial environments.
• Includes Accu-Lock+ high-speed digital signal processing technology to eliminate variations due to material position or height. Separate analog outputs provided for real-time and Accu-Lock+ measurements.
• Easy to install, set up and calibrate.
• Industry standard analog outputs 0-10 volts and 4-20 mA d-c linear with moisture allow simple integration into higher level control or monitoring systems.
• Optional indicating control displays include Moisture Monitor Model 7701 and Multi-channel Indicating Controller Model 1610e.

For brochure, Moisture Sensor Type 9900.pdf.

Latest sales in sand, epsom salts, and home insulation!   In addition to our worldwide presence in fabric manufacturing - carpet, paper and pulp are some of our oldest and best customers.  This is one of our most versatile products that works very well in most any application.  

                 Go Green!  Let us help you reduce cost and waste.

Moisture-to-Computer Interface Type 1035G

Moisture-to-Computer Interface Type 1035G

Full-span Residual Moisture Sensing with Linear Analog Output

The Moisture-to-Computer Interface Type 1035G provides the state-of-the art moisture sensing technology utilized in the Moisture Monitor Model 7701 and Model 1601e. Make moisture measurement easy. Connect it to any PLC, recorder, datalogger, or single-loop controller. Its features include...

• Full span moisture sensing over the normal range of residual moisture from near-zero levels to higher double digit percent levels.
• Industry standard, linear analog outputs over the full measurement range allows easy input and scaling in higher level systems.
• Special front-end static suppression circuitry provides reliable measurement in harsh process environmnents.
• Can be used with a wide variety of moisture sensing devices including sensing rolls, insulated full-span rolls, finger probes, duct probes, sensing plates, rods. If one of these does not fit your application, ask us. We may have or can make one that exactly fits your application.

For brochure, 1035G.pdf

                      Go Green!   Let us help you reduce cost and waste!

Portable Moisture Monitor Model M-400

One of our Top Sellers!

Portable Moisture Monitor Model M-400

Digital Meter

The Portable Moisture Monitor Model M-400 takes the world standard Model M-200 to the digital era. It has all the measurement ranges of the M-200 simplified into one full-span digital range. There is only one simple calibration setting to convert from the standard cotton scaling to other fibers, blends, and materials. And it uses the same interchangeable sensing probes as the M-200. Its features include...

• Easy-to-read digital meter displays moisture to 0.1% precision. Pushbutton access to a 3-digit calibration factor allows easy setup for different fibers, blends and materials. A comprehensive list of calibration settings is provided.
• All types of interchangeable sensing probes include hand rollers, needle probes, weighted surface probe, long needle probes with spring-loaded guides, edge sensors, special probe for insertion into tobacco bales.
• The Model M-400 can be used for all applications for which the M-200 models are used. Its linearized digital display provides the potential for many more uses.
• Strandberg offers moisture calibration services for ISO-9000 certification.

For brochure, M400.pdf or list of items and accessories Portables Item List

The Nip Check - our Portable Squeeze Roll Pressure Meter Model 8800

The Nip Check

Portable Squeeze Roll Pressure Meter Model 8800

The Model 8800 utilizes special force sensing strip which is inserted into the nip between squeezing rolls. This is the same sensing technology employed by the Type 8845 sensor used with the Spectrum 4 Portable Process Multimeter. Its features include...

• Easy to use, handheld digital measurements displayed in pounds or kilograms.
• Thin force sensing strip provides accurate and repeatable measurements for more than 1,000,000 insertions.
• Insert strip into the nip for instantaneous reading.
• Measure squeezing force at different locations across the nip to check squeezing profile.
• Check all nips in the process to ensure squeeze pressures are within control limits.
• Make corrections in pressure settings immediately. Identify rolls for service or replacement.
• Force sensing strip is detachable for easy replacement.
• Includes rechargeable battery pack and wall charger.

For brochure, Nip Check Portable Squeeze Roll Pressure Meter Model 8800.

               Go Green! Let us help you reduce cost and waste.

Spectrum 4 - Portable Process Multimeter

Spectrum 4

Portable Process Multimeter

One of our most Popular Portables

The Spectrum 4 Portable Process Multimeter allows the power of on-line process monitoring in a portable instrument. The Spectrum 4 contains the measurement software for a series of sensing probes for different process parameters. Connect a moisture probe and the Spectrum recognizes it and loads the correct measurement application. Connect a stretch/shrinkage probe and the Spectrum 4 is ready to profile the process from entry to exit... and anywhere in between. It's automatic, plug 'n' play! Store all the measurement values in memory for later printout or download to your PC. Its features include...

• Easy-to-read digital display with keypad to store measurement points and perform setup procedures.
• For residual moisture applications, a Low Moisture Interface Type S-20L contains the measurement circuitry and acts as a handle for one of the various probe attachments such as the hand roller, needle probe, etc.
• For high moisture applications such as wet pickup or size add-on, a High Moisture Interface Type S-20H contains the measurement circuitry and acts as a handle for one of the various probe attachments such as the hand roller or edge probe.
• Other sensing probes for the Spectrum 4 include RTD temperature sensor for contact measurements, infrared sensor for non-contact measurements, speed/stretch/shrinkage sensor, squeeze roll pressure sensor, and yarn package hardness sensor .
• Store up to 100 measurement points in non-volatile memory for print out or download to PC.
• Strandberg offers moisture calibration services for ISO-9000 certification.

For brochure, click one of the following Spectrum 4 Sizing.pdf, Spectrum 4 Finishing.pdf, Spectrum 4 Knit Finishing.pdf, or for a list of items and accessories Portables Item List

Digital Indicating Controller for Carpet Drying

Moisture Monitor Model 1601e

Digital Indicating Controller for Carpet Drying

The Moisture Monitor Indicating Controller Model 1601e provides moisture monitoring and control for carpet dryers. Simple operator callup of style number loads style-based set points and control limits. Its features include...

• Microprocessor-based PLC system including membrane keyboard and 1/4-VGA LCD display with non-volative memory for processing parameters, multi-channel input and output cards, RS-232 port for report generation and RS-485 port for network connection.
• Residual moisture measurement provided by the Strandberg Moisture-to-Computer Interface Type 1035E. Three spiked sensing rolls across the width are typically used. A sensor selector switches between each sensing roll and a fourth position detects the wettest of the three.
• Optionally, the 3-channel Moisture-to-Computer Interface Type 3035E provide three separate moisture sensing channels for continuous monitoring for each of the three spiked detector rolls. Add more sensors to measure both carpet face and backing.
• For noncontact measurement, use the Noncontact Moisture Sensor Type 9900. The 9900 uses penetrating microwave energy to accurately sense the moisture in the carpet. Use three 9900 sensors across the width to provide profile measurement.
• There's more... connect temperature sensors for carpet surface temperature measurements, drying zone temperatures, exhaust air temperatures. Connect density or wet pickup sensors to monitor latex application. And the 1601e is a multi-loop controller... ready to automate the carpet drying process.
• The Model 1601 is built from the Series 1600 PLC hardware and software components. This means that the 1601 can be converted to any other Series 1600 Indicating Controller or upgraded to one of the powerful "Combo Controllers" providing optimizaiton of multiple process parameters.
• The optional Series 2700 Operator Console package provides a touchscreen monitor with PC for unlimited storage of style processing data, historical data archiving and report generation.

For brochure, 1601.pdf or list of items and accessories Moisture Item List