Moisture-to-Computer Interface Type 1035G

Moisture-to-Computer Interface Type 1035G

Full-span Residual Moisture Sensing with Linear Analog Output

The Moisture-to-Computer Interface Type 1035G provides the state-of-the art moisture sensing technology utilized in the Moisture Monitor Model 7701 and Model 1601e. Make moisture measurement easy. Connect it to any PLC, recorder, datalogger, or single-loop controller. Its features include...

• Full span moisture sensing over the normal range of residual moisture from near-zero levels to higher double digit percent levels.
• Industry standard, linear analog outputs over the full measurement range allows easy input and scaling in higher level systems.
• Special front-end static suppression circuitry provides reliable measurement in harsh process environmnents.
• Can be used with a wide variety of moisture sensing devices including sensing rolls, insulated full-span rolls, finger probes, duct probes, sensing plates, rods. If one of these does not fit your application, ask us. We may have or can make one that exactly fits your application.

For brochure, 1035G.pdf

                      Go Green!   Let us help you reduce cost and waste!

Portable Moisture Monitor Model M-400

One of our Top Sellers!

Portable Moisture Monitor Model M-400

Digital Meter

The Portable Moisture Monitor Model M-400 takes the world standard Model M-200 to the digital era. It has all the measurement ranges of the M-200 simplified into one full-span digital range. There is only one simple calibration setting to convert from the standard cotton scaling to other fibers, blends, and materials. And it uses the same interchangeable sensing probes as the M-200. Its features include...

• Easy-to-read digital meter displays moisture to 0.1% precision. Pushbutton access to a 3-digit calibration factor allows easy setup for different fibers, blends and materials. A comprehensive list of calibration settings is provided.
• All types of interchangeable sensing probes include hand rollers, needle probes, weighted surface probe, long needle probes with spring-loaded guides, edge sensors, special probe for insertion into tobacco bales.
• The Model M-400 can be used for all applications for which the M-200 models are used. Its linearized digital display provides the potential for many more uses.
• Strandberg offers moisture calibration services for ISO-9000 certification.

For brochure, M400.pdf or list of items and accessories Portables Item List

The Nip Check - our Portable Squeeze Roll Pressure Meter Model 8800

The Nip Check

Portable Squeeze Roll Pressure Meter Model 8800

The Model 8800 utilizes special force sensing strip which is inserted into the nip between squeezing rolls. This is the same sensing technology employed by the Type 8845 sensor used with the Spectrum 4 Portable Process Multimeter. Its features include...

• Easy to use, handheld digital measurements displayed in pounds or kilograms.
• Thin force sensing strip provides accurate and repeatable measurements for more than 1,000,000 insertions.
• Insert strip into the nip for instantaneous reading.
• Measure squeezing force at different locations across the nip to check squeezing profile.
• Check all nips in the process to ensure squeeze pressures are within control limits.
• Make corrections in pressure settings immediately. Identify rolls for service or replacement.
• Force sensing strip is detachable for easy replacement.
• Includes rechargeable battery pack and wall charger.

For brochure, Nip Check Portable Squeeze Roll Pressure Meter Model 8800.

               Go Green! Let us help you reduce cost and waste.